Micro Flashlight
Intro: Micro Flashlight
I made this flashlight to see how small I could make one I succeeded in making one that is 16.5 mm small. the case is 3D printed and has a resolution of 0.1 mm that worked very well.
STEP 1: Printing the Case
Bellow is the stl file for the flashlight case. It takes about 10 min to print with a resolution of 0.1 mm.
STEP 2: The LED
this step is just preparing the LED for the battery pack and putting it in the case.
STEP 3: The Battery Case.
This is the battery pack for the flashlight. Once you put it in bend the positive lead of the LED so it almost touches the batteries.
STEP 4: The Top
The top is made out of electrical tape with more electrical tape to hold it on. When you push down on the electrical tape, it turns on the LED.
Comments
jeanniel1 1 year ago