Mini XY Laser Engraver by Makeblock
Intro: Mini XY Laser Engraver by Makeblock
As one of the most practical kits in Makeblock platform, XY Plotter functions as a drawing robot in its initial form and a laser engraver after adding an add-on pack. Makeblock XY Plotter has been highly acclaimed in various exhibitions, such as Maker Faire. However, the size of XY means it's not a portable machine, especially for people who need to present it during every business trip. Hence we designed this mini XY laser engraver for portability.
More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm_source=page&utm_medium=Click&utm_campaign=homexy1031
STEP 1: Assemble the Frame
STEP 2: Assemble the Linear Motion Slide & Shaft
More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 3: Install the Supporting Leg
STEP 4: Assemble the Short Beam0824 (1)
More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 5: Assemble the Short Beam0824 (2)
STEP 6: Install the Other Set of Linear Motion Slide & Shaft
More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 7: Fix the Stepper Motor Module
STEP 8: Install the U Bracket
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 9: Assemble the Timing Pulley
STEP 10: Assemble the Long Shaft and Timing Belt
STEP 11: Fix the Timing Belt
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 12: Install the Other Stepper Motor Module
STEP 13: Install the Fixing Plates
STEP 14: Install the Timing Belt
STEP 15: Install the Laser Head
STEP 16: Install the Micro Switch
STEP 17: Install the Orion Main Board and Laser Driver
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...
STEP 18: Install the Stepper Motor Driver
STEP 19: Wire Up and Install the Footpad
STEP 20: Sucess
More tutorials please visit http://www.makeblock.com/
Our community: http://openlab.makeblock.com/
the other relevant article http://www.makeblock.com/xy-plotter-robot-kit?utm...