Minute K'Nex Pistol

Introduction: Minute K'Nex Pistol

Minute K'Nex Pistol

First of all, you will need all of the things shown in the picture. Get them together.

This gun is a moderately powerful K'Nex gun, which I made to be as small and portable as possible. Enjoy!

Step 1: Build Barrel

1. Get a blue rod and put three grey connectors and one orange connector, as shown in the 1st picture.

2. Add a red connector with a green little rod in the middle slot. Put a yellow rod on the other slot, as shown in the 2nd picture.

3. Add two more grey connectors, as shown in the 3rd picture.

Now move on to building the firing rod...

Step 2: Build Firing Rod

1. Put an orange connector on the end of a blue rod, as shown in the 1st picture.

2. Add the firing rod to the barrel, as shown in the 2nd picture.

Now move onto attaching the rubber bands...

Step 3: Attaching the Rubber Bands

1. Put two rubber bands on the gun, as shown in the picture.

Enjoy your moderately powerful darrenger!

Notice: This gun has an auto-safety mechanism if you put the rubber bands on the way it is shown in the picture. This means that when you pull the firing rod back the appropriate length, it should lock into place.

Other than that, it is a simple K'Nex gun.

Be the First to Share

    Recommendations

    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest
    • Hand Tools Only Challenge

      Hand Tools Only Challenge

    84 Discussions

    0
    Guiguivinvin
    Guiguivinvin

    8 years ago on Introduction

    That's so simple ... Everybody can make that and put instrcutables , but nobody has do the instrcutables ... Minute pistol instrcutables are very simple , so that's not amazing ... 3*

    0
    KnexFreek
    KnexFreek

    Reply 11 years ago on Introduction

    i cant beileve u commented on this gun

    0
    Runeblader97
    Runeblader97

    Reply 8 years ago on Introduction

    First of all, not all of us are pros, and second of all, you commented on this gun too,so you set yourself up for a MAJOR FAIL!!!!

    0
    zach242004
    zach242004

    9 years ago on Step 3

    i want true trigger and automatic

    has anyone actually noticed that only noobs are using this ible?
    (then asking how to use the principle mechanism in knexing)

    this isnt worth an entire step. 2 peices? nah, to be honest most coulld make it with just a single slide.

    0
    mom123
    mom123

    9 years ago on Step 3

    if you put lots of rubber bands i shoots far

    0
    Knexman2020
    Knexman2020

    12 years ago on Introduction

    check ma kunai and sword! :) blow this thing... (not tryin 2 b mean but make it a little bigger)

    0
    pantsman0000
    pantsman0000

    11 years ago on Step 3

    i dont undrtstand how or what to shoot :( please reply

    0
    THECHINABOY
    THECHINABOY

    Reply 10 years ago on Introduction

    Alright ILL tell you how it works put the rubber bands as shown then pull the orange connecter connected to the blue rod thats through the hole of the gray caps pull it back then the yellow rod thingy should move on its own now put a green tiny rod in the hole thats blocked from the blue rod that you pulled back now pull the red triangle connected to the yellow thingy back the green tiny rod should shoot about 25 feet with 4 rubberbands it should curve the gun dont mind it its not a bad thing ok.

    0
    TheKnexNoob
    TheKnexNoob

    Reply 10 years ago on Step 3

    cheers werwerthy, I was wondering what the hell it did lol...

    0
    prodo123
    prodo123

    10 years ago on Introduction

    looks like a 'splodie. Except only one hammer moves via a block trigger.