Moded Nerf Gun

I am nor responsible for any injures

Step 1: Tools Needed:

For this project you will need...
1 Philips head screw driver

Step 2: Parts Needed:

Two Nerf guns. I used the clear one with the laser but it should be close with other models

Step 3: UN Screw.

Just unscrew the Nerf gun. TAKE A PICTURE SO YOU KNOW WHERE EVERYTHING GOES!

Step 4: Barrel

If you get this gun(recomended) you will see a large barrel. Unscrew this.

Step 5: Mod

Do the last few steps to both the guns. you will need to twist the springs together into one

Step 6: Reassembly

reassemble