Morse Code
Intro: Morse Code
This project is similar to the Prank Handshake, with
the addition of a fork and LED (light emitting diode), using LittleBits technology.
STEP 1: Morse Code
Start with your power module.
STEP 2: Morse Code
Connect a button to the power module.
STEP 3: Morse Code
Connect a fork to the button.
STEP 4: Morse Code
Attach an LED to one of the fork outputs.
STEP 5: Morse Code
Press the button to see the LED light up.
STEP 6: Morse Code
Attach a buzzer to another fork output.
STEP 7: Morse Code
Press the button to tap Morse Code.
Each letter or number is represented by a
pattern of dots and dashes.
See the table from Wikipedia below (Source:
http://en.wikipedia.org/wiki/Morse_code).
Tap the button briefly for a dot; hold the
button longer for a dash.
See and hear Morse Code at the same time!
Comments
seamster 9 years ago
Nicely done!