MotaBoi's Semi-Auto Knex Rifle WITH INSTRUCTIONS!!!!!!!!!!1

Ok, this is my semi auto that I have been working on for quite a while, I started before my M4. It gets about 30 feet with one elastic, if I put two then the trigger explodes. So technically, this isn't even a semi auto until I reinforce the trigger with some hot glue, but whatever, it will be if I glue it so I don't know what i'm going on about... I should shut up now so you can see the pics shouldn't I?

Some features:
Range - 30+ ft
# Of Shots - 8
True Trigger
REALLY Comfy Handle
Semi-Auto
Convert able to an RBG
Annoying Reload Unless Converted To RBG Mode
Comfy Stock
Super Comfy Forward Grip

IF THERE IS NOT ENOUGH QUALITY IN THESE PICTURES, CLICK THEM AND CLICK ORIGINAL SIZE TO SEE THEM IN FULL SIZE AND QUALITY!

Be the First to Share

Recommendations

World's Fastest Can Opener by sirjason132 in Kitchen

8 1.4K

Cryptex - 10 Steps for 110 Possibles Designs by Tony Vanpoucke in Toys & Games

174 13K

3D Printed Futuristic Space Age Wall Clock by kura_kura in 3D Printing

59 5.5K

Easy DIY James Webb Telescope Mirror. by backwards lamb in Decorating

1 156 12K

Game Design: Student Design Challenge
Big and Small Contest
For the Home Contest

81 Comments

LvNo1000

9 years ago on Introduction

What makes the ram return?

patriots8888

11 years ago on Introduction

Ha it looks like the P90M1 nice job, great gun

LvNo1000

9 years ago on Introduction

Not sure if the pics will be sufficient, but I'll try building it anyway.

Oblivitus

11 years ago on Introduction

Nice design. Make a stronger one so it can hold more elastics.

knexpete

11 years ago on Introduction

Just to point out, and this may seem a bit nerdy, but it does seem to me like this isn't a truly semi-auto weapon, for one simple reason: the elastic band pulling the firing pin forwards needs to be re-attached to the firing pin after shooting, making it still a bolt action weapon.
But, could this feasibly work on any other gun (Barrax's ACR in particular)???