Introduction: Mounting LongBoard

By Dolezine
About: Thanks for Viewing

I needed a way to hang my long board when I am not using it or its not in my car. I found using PVC pipe works great for mounting the long board. I used 3 inch pvc that I cut in half and used the two half for the trucks of the long board to hang on.

supplies here

Step 1: Tools and Supplies

Supplies-

3 inch PVC pipe

screws

saw

Tools

screw driver

drill bits

Step 2: Mounting

Mounting the long board is pretty straight forward. The length of the two pieces of of pvc are 4 inches long. You could make these what ever size you feel fits your wheels/trucks the best. I cut the pvc in half and used the sides of the PVC for the mounts. I held my board up to wall on were I wanted to hang it, and marked where the trucks were. I pre-drilled the holes in the PVC and started the screws in the PVC before trying to screw into the wall. I would recommened finding a stud or using drywall anchor screws.