MouseBot

Intro: MouseBot

This is MouseBot. Robot that moves forward and when touch wall or something it go back or sidestep it.
NOTE: while i was recording the video batteries ... died :D and mouse stopped ... a moment later the camera stopped too :D

STEP 1: EL. Scheme and Princip of Work.

I downloaded the schemes from the net. It's working! :)

STEP 2: Materials & Tools

To make this robot you need:
TOOLS:
>scissors
>pliers
>pen
>knife
>ruler
MATERIALS
>battery hold
>CD
>wires
>2 batteries
>2 switches
>2 motors
>power switch

STEP 3: Draw and Cut the CD

You must cut pieces like on the photos.
Remove the outside parts (part 1 and 2 on the photo) ,they are unnecessary.

STEP 4: Glue the Parts Together

The body must look something close to the picture ,but in fact you can experiment with the appearance =]]

STEP 5: Connect the Wires

Solder the wires to the elements (motors ,battery hold ,etc.).

STEP 6: Connect All Together

Connect all together. Glue the battery hold and motors to the body. Power switch and switches too. And connect wires. You can put on tale and mustaches on the robot..
It's done =]]

Comments

[Goodhart]

Um, I don't mean to be critical but when I saw the title "Mouse Bot" I assumed a computer mouse was being used....This "appears" as though it could be adapted into a mouse body though. :-)

[ProBodger]

Nice, I will definately give this a go.