Mp5k V3

by Johnhall44

766223

Intro: Mp5k V3

This is probably going to be the last big update to this gun.It is getting about 45ft is around 12in. long, 7in. tall and 5 connectors wide. This gun uses a different trigger mech that dr. richtofen designed for this and I modified to fit better. Please leave a comment below about what parts you like and what you think should be improved.

20 Comments

JonnyBGood 11 years ago

If I ever make this, I will definitly make the concealment case that you had a picture of somewhere else. That would be just plain awesome.

Johnhall44 11 years ago

Thanks,I was working on the case but ran out of the pieces I needed and it was slightly overcomplicated to make it work. o well

JonnyBGood 10 years ago

I made a case. I'll make this gun when it's posted. =)

JonnyBGood 10 years ago

My suitcase wasn't made to the dimensions of the MP5 but a little modification and it will work.

Knex.X 11 years ago

Pretty awesome! Instructions maybe?

Johnhall44 11 years ago

Thanks, I might just make instructions at some point =

The Red Book of Westmarch 11 years ago

I guess it is alright, but it could use some work. First off, the body does not seem right. It looks altogether too large... That could be just me, but that is how I see it. Secondly, you could have made a bigger magazine, as the one you have seems to me to be weird looking. The trigger guard is off (I think) a little bit too. =D Are you gonna stop updating this, or are you gonna re-do it often (kinda like I did with my G36Ks).

Johnhall44 11 years ago

It is 1 ft, only .8 in. shorter the real gun. I was trying to keep the mag as close in size to the real mp5k, I couldn't put the curve in the mag without it looking weirder or I would have to go back to the old mag system on V2. The trigger guard is only very slightly off. I do plan on updating this occasionally. =D

The Red Book of Westmarch 11 years ago

Well, it may be the right (correct) length (or rather, almost. XD) but is the the correct height wise (chamber part only)? It looks kinda fat to me... BTW, I am glad that you plan to progressively update this. It could be a GREAT gun!

Johnhall44 11 years ago

Im not sure about the other part you mentioned for size, oh well. lol, what about an mp5k that takes m4 mags XD

Johnhall44 11 years ago

I have a pic some where of what it would look like =P

Vaetheon 11 years ago

Cool i think its fine

dr. richtofen 11 years ago

Nice! Glad that the trigger turned out good :D
Keep it up

Johnhall44 11 years ago

Yep, thanks =D next is the lever action shotgun,that will be interesting =P