My Finished MTVCribs project Eagle Eye View

Step 1: Kitchen

My first step was to make the kitchen, where I used 2 different texture, 1.Checkers for the floor, 2. Marble for the counter top. I did not use any major tools for looks in the kitchen, just basic shapes.

Step 2: Living Room

My next step was too make the living room, I used the boolean tool to subtract from the couch and chair to make the indents in them. I used the noise pattern for the carpet, and some other basic shapes for everything else like the tv and the table holding it.

Step 3: Dining Room

This step took the longest, I used mesh editing to make the fork, just by making 3 prongs, and for the spoon I edited the sphere to fold in on itself then changed it to make it flat which I then grouped it to a rectangle to make a spoon. I used the same process for the plate as I did for the spoon just without making it smaller, and as well the bowl just keeping it taller. The chairs and table was just basic shapes put together.

Step 4: Doorway

This step was by far the easiest introducing the door, which I linked a box to a cylinder so it would rotate around it, and used Boolean-subtract to make the doorway itself

Step 5: Bedroom

For the carpet I used the noise pattern to make it look like carpet, and for the bed, cabinet, and closet I just used basic shapes put together.

Step 6: Bathroom

This step I made the bathroom, I used the marble texture for the sink. For the sink and bathtub/shower I used boxes for each, I used a cylinder Boolean-subtract for the bathtub/shower, and for the sink I just used a box subtracting a sphere to make the indent. For the toilet I did the same thing as the bowl in the dining room just bigger attaching it to a long box behind it, the towel rack and mirror are just basic shapes.