Musical Fruit Using Drawdio

By connecting some fruit or vegetables together then either by using resistors or wires.

Step 1: Drawdio Circuit Board

First construct a drawdio circuit board

Step 2: Fruits or Vegies

Pic fruits or vegies that have a high amout of liquid in side

Step 3: Wiring the Fuit

Start inserting wires or resistor depending how variant you want the sounds

Step 4: Connect Drawdio

Next Pick the fluid that is going to be the base and use a alligator clamp (or a soldered wire on the drawdio) in one of the fruits

Step 5:

Lastly use another allegator clamp (or wire) accross the fruit of you choice