This knex knife is very easy to make and is pretty strong. You will need: 10 blue connectors, 1 dark white connector, 1 green conector, 3 yellow conectors, 2 orange connectors, 2 yellow rods, 2 white rods, 3 green rods, 1 red rod, and 1 black rod.

Please rate!

Step 1: The Handle

When you make the handle, switch the blue connector from side to side.

Step 2: The Blade

Just look at the picture and build what u see.

Step 3: Thats It, You Are Done

if you have any trouble building this just let me know.

Be the First to Share

Recommendations

World's Fastest Can Opener by sirjason132 in Kitchen

30 6.4K

Cryptex - 10 Steps for 110 Possibles Designs by Tony Vanpoucke in Toys & Games

181 13K

3D Printed Futuristic Space Age Wall Clock by kura_kura in 3D Printing

61 7.3K

Easy DIY James Webb Telescope Mirror. by backwards lamb in Decorating

1 160 13K

For the Home Contest
Make It Bridge
Big and Small Contest

7 Comments

JDproductions

11 years ago on Introduction

dear reader,

i advice this gun if you gonna knex war!!!!!
thats because if you have builded a usp or pistol or a one hand gun than you are good at long range and close range with this low part count 1 minute knife.

it has low part count so you get enough knex left for a pistol!!!!!!!!!!!!!!

from a mw2 fan