MyAxe 08
Intro: MyAxe 08
Hello! I wanted to make a simple, cheap and minimalistic target board for picaxe.
It has got M/F headers and only the necessary components.
You can even make your own shields!
Later, I will add circuit diagrams and other stuff!
Video of more complicated blink:
------------------------------------------------------------------
symbol led = 0
symbol delay = b0
delay = 1000
main:
high led
pause delay
low led
pause delay
let delay = delay - 10
goto main
------------------------------------------------------------------
It has got M/F headers and only the necessary components.
You can even make your own shields!
Later, I will add circuit diagrams and other stuff!
Video of more complicated blink:
------------------------------------------------------------------
symbol led = 0
symbol delay = b0
delay = 1000
main:
high led
pause delay
low led
pause delay
let delay = delay - 10
goto main
------------------------------------------------------------------
5 Comments
fredfertlesquirt 5 years ago
any chance of a pic of the other side (circuit layout?
noik 11 years ago
BotFIN 11 years ago
justbennett 11 years ago
manuka 11 years ago
I've been a great fan of these battery boxes & regularly hack them for all manner of circuitry. See perhaps =>https://www.instructables.com/id/Single-LED-ammeter-FLED-based/ One we made used a 3 X AA box but fitted just 2 cells & put the PICAXE circuitry on a lift out PCB "finger" that fitted it the 3rd cell space. Holes for LEDs etc were suitably drilled. The lid slid on to hide everything nicely. Stan.