Introduction: NES CONTROLLER USB FLASHDRIVE
This is a great if you love NES GAMES OR RETRO GAMES
Step 1 Undo all the screws from the back
Step 2 Remove the circuit board but leave all buttons in the remote
Step 3 get your USB and remove housing
Step 4 put the usb into the empty nes controller with extension plugged into the usb & duct tape it all in!
Step 5 Put screws in and your done!
Step 1 Undo all the screws from the back
Step 2 Remove the circuit board but leave all buttons in the remote
Step 3 get your USB and remove housing
Step 4 put the usb into the empty nes controller with extension plugged into the usb & duct tape it all in!
Step 5 Put screws in and your done!