Introduction: Nerf Jolt Mod(Byte TH-2)
More by the author:
About: I’ll be back making instructables soon, took a long break from doing these
The 2 is for the version.
Note the sloppy paint job.
Step 1: Another Layer of Tape
if you didn't do the other mod, follow these: unscrew the 4 screws on the bottom, And add 2 layers of tape to the plunger head.
If you did do the other mod, follow these: unscrew the 4 screws again and add another layer of tape to the plunger head.
Step 2: Do X2 Rubber Bands From the Last One(8 Is Our Rubber Bands Now)
Attach the silencer from the other instructable, add another four rubber bands.
Step 3: Paint Job
It's so sloppy.
Step 4: Done!
Did ya notice I was x2ing everything?
Anyway, I will be doing a line of 4 step jol mods.
