Nerf Stefan Dart From an Elite
Intro: Nerf Stefan Dart From an Elite
Hey guys! Today I have made my own stefans without buying foam!
Stuff needed
Nerf gun with no dart posts
Elite dart
Xacto knife/any other thin tool
Pros
Accuracy(about same accuracy as koosh darts)
Power(A lot better than a normal elite)
Cons
Can't really think of any, sorry.
Stuff needed
Nerf gun with no dart posts
Elite dart
Xacto knife/any other thin tool
Pros
Accuracy(about same accuracy as koosh darts)
Power(A lot better than a normal elite)
Cons
Can't really think of any, sorry.
STEP 1: Pry Off the Dart Tip
This attempt I didn't only get the rubber off, but this will take practice anyway.
STEP 2: Cutting
Cut the dart a little over half, and discard the foam
STEP 3: Done!
You have made my dart. Congrats.
Also, this was hitting 90 FPS in my sledgefire slug for me. This may differ for people with gray triggers(obviously) and with a grey trigger this would probably get 60-70 with sledgefire slug shell.
Also, this was hitting 90 FPS in my sledgefire slug for me. This may differ for people with gray triggers(obviously) and with a grey trigger this would probably get 60-70 with sledgefire slug shell.
STEP 4: Tips
If the tip starts coming off, just glue it back on.
Rear load sledgefire slugs with this. It's a lot easier then stock darts.
Make many of these. They are good darts.
Rear load sledgefire slugs with this. It's a lot easier then stock darts.
Make many of these. They are good darts.
4 Comments
nerfrocketeer 7 years ago
tinyhooman 7 years ago
thx man, you made my first ever knex gun(your knex nerf jolt)
tinyhooman 7 years ago
aye speaking of jolts just got a new one, it's the 2011 one :D I didn't know they sold them anymore
Dak_4008 3 years ago