Nice Pallet Coffee Table
Intro: Nice Pallet Coffee Table
I did this table for my break area in my tool crib with palletts, taking care
when taking the pallett apart as the wood is dry and will crack.
The logo was made by reversing an image found on the internet and printing it on wax paper
and imediately transfering it to the bare wood using a piece of plastic ( credit card ).
STEP 1:
taking apart carefully....
STEP 2:
Triumph motorcycle logo transfer
STEP 3:
all done with a few coats of varnish
9 Comments
TrinnaL 6 years ago
brian.hunt.545 8 years ago
please update with instructions
The Vault 8 years ago
Great work! Very inspiring!
stoneyend77 8 years ago
Great looking table, but these are not directions. Please update.
Desjen 8 years ago
I was hoping it would explain how to do the legs..
signalsoldier 8 years ago
The design is simple enough for a seasoned builder but needs more detailed instructions for a moderate or novice builder.
Thanks for the submission! Great looking table.
alanjamesblair 8 years ago
DIY Hacks and How Tos 8 years ago
Awesome coffee table.
patrick1967 8 years ago
thanks