Night Angle

Intro: Night Angle

Introduction:

Children under 6 years old are often afraid of the darkness during the night, adults have been frustrating about how to make their children not afraid of the darkness anymore? This has been a problem for every family in this world, and I made this Lamp to solve this problem. This lamp can be turned on during the night, and the light will become darker after every five minutes. There are 6 tiny light bulbs in the lamp, one of the light bulbs will be turned down after every 5 minutes. In this case, users will be able to get used to the darkness in a slow period of time, and it won’t be a problem for wasting energy.

STEP 1: Follow the Picture for Connecting the Right Jumper Wires

STEP 2: Get the Right Jumper Wire on the Arduino Leonardo Board

STEP 3: Connect Each Jumper Wire on to the Breadboard

STEP 4: Copy the Code I Have Provided on the Arduino Program

STEP 5: Connect the Computer and Arduino

STEP 6: Stick Each Feather Around the Shaped Box

STEP 7: Stick the Second Round on the Outside

STEP 8: Use a Short Length of Ribbon to Create a Tied Ribbon

STEP 9: Use a Longer Length Ribbon and Tie Around the Box

STEP 10: Stick It Close to the Feather

STEP 11: Connect With the Computer and Put the Bread Board in the Box With the Feather Box on It