Niron's Machine

Today I am go ing to tell you how to make toy with a card board now see it

Step 1: First Step

We cut card board in square make sure it the same all.

Step 2: Cut 5 Part

We cut card board a gain but we cut in five part and make sure all the part is same too.

Step 3: Make It in One Box

And we make it in one box not to big not to small and be careful too.

Step 4: Cut Shape Like a Shell 2 Part

We cut a shape like a sell maybe two part if you want to do it strong you can cut three part and glue

Step 5: Cut 6 Circle

We cut six circle.

Step 6: Glue It to 2 Part

And we take four circle and glue together into two part.

Step 7: Glue

We have left two we glue in to one part.

Step 8: Put Hold

We put two hold on the top and put straw go in and cut it short

Step 9: Put the Circle

We put the hold on the circle and put the stick go in

Step 10: Put the Hold

Put the hold on sell card board and put the stick in to the sell card board

Step 11: Cut Propeller

We cut the shape like propeller and put the hold

Step 12: Put the Stick

We take the two circle that we glue and put the hold on both and put the stick in to that circle

Step 13: Design

This my design if you want to do your design you can do it

Step 14: This Is My Painting

This is my painting when we paint we have to be fearful

Step 15: Paint

When you paint out side finish you can paint in side to

Step 16: Finish

This my picture when finish

Step 17: Toy Movie

This is for play with the toyi