Obstacle Avoiding Robot - TinkerCAD Simulation

by Pratheesha

1.3K30

Intro: Obstacle Avoiding Robot - TinkerCAD Simulation

This is a TinkerCAD Simulation Video of Obstacle Avoiding Robot

STEP 1: Components Required

You will require the Following Components

01. Breadboard - 1 No.

02 . L293D - 1 No.

03 . DC Motor - 2 Nos.

04 . Ultrasonic Sensor - 1 No.

05 . Arduino - 1 No.

STEP 2: Connections

Connect the Components as shown in the above image

STEP 3: Blocks

Assemble the Blocks as shown in the above image for the Obstacle Avoiding Robot