Introduction: Origami Spiky Cuboctahedron
About: Hanging out with friends and playing video games is what I live for.
AKA Spiky Ball
Created and assembled by Daniel Martin Luna.
Created and assembled by Daniel Martin Luna.
Step 1: Materials
You will need 12 square pieces of origami paper.
If you want a small spiky ball, use small square pieces of paper. Vice Versa.
(Thin paper is not advised)
If you want a small spiky ball, use small square pieces of paper. Vice Versa.
(Thin paper is not advised)
Step 2: Folding the Module
Step 3: Assembly
Insert the modules as shown:
There should be 2 pods of 4 modules.
Stick a pencil through the holes of the 4 modules.
Keeping the ends aligned, proceed to connect the 2 pods with the 4 remaining modules.
If you are more a a visual learner try this link.
There should be 2 pods of 4 modules.
Stick a pencil through the holes of the 4 modules.
Keeping the ends aligned, proceed to connect the 2 pods with the 4 remaining modules.
If you are more a a visual learner try this link.
Step 4: Just for Fun?!
I added a solar powered LED light inside the Cuboctahedron.