Introduction: Computer Desk Build
Hello & warm welcome to
instructables community & My All Friends.......
Every computer lover Dream to be Desk one of its All kind. Everybody has their dream step in their mind. Some of them execute. I also one of them who finally execute their dream setup into reality. It is so wonderful when my imagine setup comes into reality. I am not a professional woodworker. I am learner by mixing many thing this has been formed.in this setup my brother helps me a lot. We took almost 48days to build. This table we have made at our home not in the shop and this table is purely hand made Every Logo is made by hand with the help of jig saw. In the middle of project there are lots of challenges that we have faced. We made all facilities according to our need. This table has built in speaker, huge storage space monitor casing is also custom made if you are not using then you can lay down monitor, while sitting you feel with RGB led that you are sitting in a gaming station & carnival begin, a beautiful feeling while sitting on this desk. This is really a massive & hardworking job making such kind of project it is 7 feet long and 4 feet wide.so how we made this desk lets go: ----
Logo made are follows: -
R.O.G (Republic of gamer)
Because we are huge fan of these Brand names
1. Ply board 8’ X 4’ (Qty- 4)
2. Acrylic Sheet 6’X5’ (Qty -1)
3. Telescopic rudder (Qty – 20)
4. RGB 5050 led -20 meter
5. Speaker grill 4”– 5qty
6. Led white light – 4 qty.
Total cost of this project is INR 36,000 (Approximately- 550$ U.S.D)
Step 1: Made Paper Design,Cutting & Assembling
First of all, I Design my dream setup on paper then execute that drawing on computer with google sketch up software. Google sketch up is the best tool in which you can check which color of laminate will suite to your desk & you can do necessary changes as you like. After finalizing the design then fist of all cut the larger material like Table top and sides for your desk. use sketch up or AutoCAD before cutting material draw your size on software & checked by placing that cutting size on ply board drawing. After finalizing your cutting then start cutting laminate using circular saw or table. After that assembled each material one by one with the help of elbow strip & 1/2" screws. Always take help of another person while installing larger portion for holding purpose like table top & drawer side wall.
Step 2: Drawer Installation
Step 3: Logo Cutting on Plyboard & Installation on Table
Cutting of the logos are done with the help of jig saw after cutting install ply on the plyboard
Step 4: RGB Led Installation
RGB LED wire must be in sequence other vise half led will show different colour.use glue stick while installing rgb strip.
Step 5: Finally!!!!!!!!!
Participated in the
Halloween Decor Contest 2016