Paracord Guitar Pick

8,231

188

11

Introduction: Paracord Guitar Pick

This is my first instructable a paracord guitar pick, not the best photos but they work.

Step 1: Things You Will Need

- You will need 1 foot of paracord
- a lighter
- something to cut an flatten melted cord

Step 2: Shaping the Paper Clip

Take the paper clip and pull the middle part outward to form this shape.

Step 3: Weaving

You send the end through the taller end and do just the normal weave up and down and around and back. Then countinue down to the V in the paper clip.

Step 4: Finishing

Once at the end of the V come down under the V and up then around the other side. Now you are ready to melt. When ready to melt you melt the ends good then put them down on the same side and flatten it on some other cord. Now you are done.

1 Person Made This Project!

Recommendations

  • STEM Contest

    STEM Contest
  • Gardening Challenge

    Gardening Challenge
  • Trash to Treasure Contest

    Trash to Treasure Contest

11 Comments

0
NinjaBoy12
NinjaBoy12

5 years ago

Hey guys this is a great project. But everyone remember that this pick will ruin strings and your guitar body.

0
zjawesome
zjawesome

6 years ago

Awesome!

0
zjawesome
zjawesome

Reply 6 years ago

I modified it a little bit

temp_-823169756.jpg
0
SJF007
SJF007

7 years ago

AWESOME

0
wilgubeast
wilgubeast

8 years ago on Introduction

That's the best looking paracord pick that I've seen. Does the paperclip damage your strings at all?