Pico-Power K'nex Gun Mod
Intro: Pico-Power K'nex Gun Mod
The bigger and more powerful version than the first one. It shoots 20 feet or more and uses 15 pieces! It's a fun gun to build and shoot.
Pieces:
4 Orange/ Brown Connectors
6 Grey Connectors
2 Light Grey Connectors
2 Yellow Rods
1 White Rod
? White Rods for Bullets :D
Pieces:
4 Orange/ Brown Connectors
6 Grey Connectors
2 Light Grey Connectors
2 Yellow Rods
1 White Rod
? White Rods for Bullets :D
STEP 1: Body and Barrell of Gun
The barrell is strong, so don't worry about it breaking. Build the body and barrell just like the picture.
STEP 2: Firing Pin
This is the workhorse of the gun. Use a Rubberband as shown. Stick the rod through the holes and put a loop of the rubberband on each sides of the orange connector.
STEP 3: Firing!!!
Pull the Pin back and put the trigger in so that it blocks the rod from going through the barrell. Load in a white rod into the front of the barrell. Pull the trigger DOWN and it will fire!
Have Fun!
Have Fun!
33 Comments
knex_mepalm 14 years ago
rrr67 15 years ago
rrr67 15 years ago
lilpepsikraker 16 years ago
Lord Of Mystra 16 years ago
KamikazeSniper360 16 years ago
Lord Of Mystra 16 years ago
originalwynne 16 years ago
KamikazeSniper360 16 years ago
Dejectory 16 years ago
KamikazeSniper360 16 years ago
captianchase 16 years ago
KamikazeSniper360 16 years ago
augsut345 16 years ago
KamikazeSniper360 16 years ago
augsut345 16 years ago
KamikazeSniper360 16 years ago
mickey shimitz 17 years ago
KamikazeSniper360 16 years ago
Kaiven 17 years ago