Pico-power K'nex Gun
Intro: Pico-power K'nex Gun
Smallest K'nex gun on instructables that I know of. It uses only 9 pieces. It can shoot up to 15 feet but it can be less or more depending on the rubber bands you use.
UPDATE!!! put a new rubber band on it and reinforced the gun with duct tape(also makes it look cool)and used a bb as ammo... it hit my bathroom wall 30+ feet away with a good amount of force
UPDATE!!! put a new rubber band on it and reinforced the gun with duct tape(also makes it look cool)and used a bb as ammo... it hit my bathroom wall 30+ feet away with a good amount of force
STEP 1: The Parts You Need
You need,
Connectors:
2 double ended orange/brown
4 single clip gray
1 two clip gray white
Rods:
2 small blueish silver rods
? small black/green rods (for ammo)
Other:
rubber band(s)
sand paper
Connectors:
2 double ended orange/brown
4 single clip gray
1 two clip gray white
Rods:
2 small blueish silver rods
? small black/green rods (for ammo)
Other:
rubber band(s)
sand paper
STEP 2: Build the Gun
Use the picture below to build the main part of the gun
STEP 3: Make the Fireing Pin
Use the picture.
Also look at the other pic. I recommend that you sand the end of the pin that goes into the barrel so it doen't catch something in the barrel and make it misfire
Also look at the other pic. I recommend that you sand the end of the pin that goes into the barrel so it doen't catch something in the barrel and make it misfire
STEP 4: Prepare to Fire
blank
58 Comments
llamah 12 years ago
knex_mepalm 15 years ago
smilee 14 years ago
m1n1j1mmy 15 years ago
mashedpotato13 15 years ago
The Jamalam 15 years ago
randomgerbil 15 years ago
zeda.beta 15 years ago
zeda.beta 15 years ago
BBman 16 years ago
mattccc 16 years ago
nkk07 16 years ago
yourface 16 years ago
tmmdude 16 years ago
gobob29 17 years ago
Luka_! 16 years ago
ilikefireworks 16 years ago
Cartuner55 16 years ago
pyro22 17 years ago
knex boy 16 years ago