Police Throwie
Intro: Police Throwie
More of an idea then a hardcore instruction. Playing idly with stuff on my desk, I noticed these look a lot like a police red/blue light, something I once freaked out over when my son was playing with a red/green/blue flashing ring with the green broken in the back seat. Seeing it out of the corner of your eye has a near-visceral reaction, especially when driving.
STEP 1: Supplies
Two LEDs, one blue, one red flasher.
Battery (here a 2032, but any 3v or two stacked 1.5v ought to do)
Magnet (optional, if intended for metal attachment)
Tape
Battery (here a 2032, but any 3v or two stacked 1.5v ought to do)
Magnet (optional, if intended for metal attachment)
Tape
STEP 2: Build
Attach both LEDs as per https://www.instructables.com/id/LED-Throwies/ to the battery, tape up with magnet. The blue LED will glow, but when the red blinker blinks it will temporarily overpower it. This results in a blue glow interrupted by red flashes. It won't exactly look like The Man showing up under close scrutiny, but from a distance seen briefly it's very powerful.
STEP 3: Done
Demo vid. I know this is a bit brief and more of an idea then an instruction, but it'll sure freak people out seen at night.
18 Comments
arthur92710 15 years ago
coggie 15 years ago
pullinsb 14 years ago
http://en.wikipedia.org/wiki/Police_impersonation
Kiteman 16 years ago
coggie 15 years ago
FrenchCrawler 16 years ago
Kiteman 16 years ago
FrenchCrawler 16 years ago
Kiteman 16 years ago
... Oh, you understand me... ah... >blush<
joejoerowley 15 years ago
Lftndbt 16 years ago
bakenbitz 16 years ago
Ushanka 16 years ago
rockyt 16 years ago
Santas little helper 16 years ago
Kiteman 16 years ago
GrimTheLost 16 years ago
a grain of alt. 16 years ago