Introduction: Preserving a Spare Alternator.
It's always good to have a spare alternator. They fail when least expected. This one I got is working fine but it's a bit grimy from the car. The car has another one in operation so I want to put this one into storage.
Step 1: Cleaning.
I used engine degreaser to get the grime off. Took only 7 minutes of cleaning and washing off in clean water to clean most of it off.
Step 2: Ready for Storage.
Now the windings and casing are a bit cleaner and into the storage room for this baby. When it is needed in the future, I can easily swap it out knowing it's ready for use!
6 Comments
8 years ago
Could you use this alternator and a small gas engine to build an electric generator?
Reply 8 years ago
I've seen people do that but it would just put out a 13 volt +/- DC power.
Reply 8 years ago
That problem could be solved with a power inverter. A Harbor Freight power inverter is the cheapest option!
Reply 8 years ago
you could pair that up with an inverter to make a generator but you would pry need a battery but you must mean a convertor since an inverter converts 12 DC to 110 ac
Reply 8 years ago on Introduction
I don't know what a "convertor" is. Would you mind linking your comment to a site or a picture?
These is the best project so far: https://www.instructables.com/id/Lawnmower-Power-Generator-With-A-Twist/
Reply 8 years ago
Anything is possible.