QUADRONE COPTER

by FARISTULLAH

11400

Intro: QUADRONE COPTER

WE MADE A QUADRONE COPTER THAT NEED 9 COMPONENT TO FINISHED IT

STEP 1:

FIRSTLY, WE START WITH THE BASE OF THE DRONE BODY.

STEP 2:

THEN, CARRY ON WITH THE SECOND BASE ON TOP OF THE DRONE BODY

STEP 3:

AFTER THAT WE WILL TAKE A STEP TO THE SPINNER FOR THE BLADE TO SPIN

STEP 4:

THE WE ADD THE SPIDER TOP TO HOLD BOTH BASE

STEP 5:

WE CREATE AN ARM TO MAKE SURE THERE IS SOMETHING TO HOLD THE BLADE

STEP 6:

AFTER THAT SOME PILLAR SHOULD HOLD EVERY COMPONENT AT THE SPIDER ARM OF THE DRONE

STEP 7:

THIS IS SPACER THAT MAKE SURE THE FAN AND THE MOTOR SHOULD HOLD TOGETHER

STEP 8:

LASTLY, WE ADD THE FAN BLADE TO MAKE SURE OUR DRON CAN FLY WITH THOSE SPIDER ARM

STEP 9:

AND FOR THE MOTOR TO MAKE SURE ALL THE FUNCTION OF THE FAN BLADE WORK TOGETHER