Railgun Pistol (Instructions)

Introduction: Railgun Pistol (Instructions)

About: I like Minecraft, Medieval architecture (primarily castles), K'nex guns, and things that explode. Be sure to check out my K'nex guns and SUBSCRIBE!!!

This is the instructable for my Railgun Pistol. Please rate, comment, and subscribe.

Here is the part list. Thanks to headlessknight for making it.
RAILGUN PISTOL PART LIST

CON

YELLOW - 13
WHITE - 14
GREEN - 2
RED - 11
ORANGE - 21
DARK GREY - 9

RODS

GREEN - 77
WHITE - 11
BLUE - 17

MISC

BLUE CLIPS - 2
TAN CLIPS - 1
BLUE SPACERS - 8
FEMALE BALL JOINTS - 1

Step 1:

Here you will build the gun.

Image 1 : Build these pieces.
Image 2 : Build this. It is the firing pin.
Image 3 : Here is another view of one of the pieces from image 1. Put the firing pin in the gun also.
Image 4 : Here is a view of the trigger.
Image 5 : Put the other panel from image 1 on the other part.
Image 6 : This shows how far to put the bullet in.
Image 7 : Put the red connecter were it is shown.
Image 8 : Put this piece on the gun.

Step 2: You're Done!

Thanks for building my Railgun Pistol. Have fun with it, and be sure to subscribe.

Be the First to Share

    Recommendations

    • Candy Speed Challenge

      Candy Speed Challenge
    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest

    9 Discussions

    0
    ProtectTheAlphaWolf
    ProtectTheAlphaWolf

    Reply 3 years ago

    You pull back the firing pin, and you put a yellow rod in the front of the barrel

    RAILGUN PISTOL PART LIST

    CON

    YELLOW - 13
    WHITE - 14
    GREEN - 2
    RED - 11
    ORANGE - 21
    DARK GREY - 9

    RODS

    GREEN - 77
    WHITE - 11
    BLUE - 17

    MISC

    BLUE CLIPS - 2
    TAN CLIPS - 1
    BLUE SPACERS - 8
    FEMALE BALL JOINTS - 1

    here you go

    0
    ~KnexBuild~
    ~KnexBuild~

    Reply 8 years ago on Introduction

    Thanks for making the part list. I'll add it to the instructable