Rainbow Loom Fishtail

First you will want to get your loom hook and bands. I'm using blue and green.

Step 1:

First you will want to get your loom, hook, and bands. I'm using blue and green.

Step 2: Placing Bands

The first band you will put on the loon in an 8

Step 3:

The next 2 bands you will put normal, not twisted in an 8.

Step 4: Looping

With your hook you are going to grab the bottom band and bring it to the top on both sides

Step 5: Next

Next your going to add a band to the top (not twisted). Then take the bottom band to the top.

Step 6: Add Another Band

Now add another band and bring the bottom band to the top.

Step 7: Repeat

all you have to do is repeat steps 5&6 until desired length.

Step 8: Taking Your Bracelet Off the Loom

First you should have 2 bands on the loom You want to tale off the bottom band so there is only 1 band left on the loom. Then take your hook grab both ends of the band and take is off

Step 9: Bracelet

Take an S or C clip sand attach it to both ends of the bracelet

Comments

[gamegirl003]

Thx for posting this. It's really useful. I made it perfectly without any confusion. Once again thx for posting this.