Introduction: Rainbow Loom Owl Charm
Step 1: What You Will Need
You will need 38 light pink bands
8 hot pink bands
4 black bands
4 yellow bands
1 rainbow loom
1 hook
Step 2: Beginning Your Owl
Take 2 light pink bands and put them like they are in the picture. These will be your ears! Next take 2 bands again and put them on the loom like a triple single! Take 2 bands at a time until you see different .
Step 3:
Now take 2 black bands and put them on the left and right pegs like shown this will be the eyes!
Step 4: The Beak
Now you are going to take 2 yellow bands and put them on the middle peg
Step 5: Finishing Your Head
Now take two light pink bands and lay them on the next three pegs. Lastly , put them on diagonally like shown!
Step 6:
Now take a SINGLE band and lay it on diagonally and do it again on the other side
Step 7: Begin Your Body
Now you want to take two hot pink bands and lay them in your middle peg
Step 8:
Continue doing this until you have no more bands
Step 9:
Now take two light pink bands again and put them on the right and left pegs STOP when you come to a diagonal
Step 10: The Feet
Now take a SINGLE yellow band and wrap it around your hook 3x. Next take TWO light pink bands and put the on the edge of your hook like shown and pull / push the yellow band on it and set it on your loom do this a second time only put it on the other side
Step 11:
Now add a cap band wrap around 3x
Step 12: Begin Looping
First reach behind the cap band and pull out the first set of bands and loop them next go back and do the other set finally get the hot pink bands! Now loop up like a triple single
Step 13:
Now it gets tricky so bare with me! Take you hook and push back the first couple of bands and pull out the first set of bands do again for the other side and one more time for the middle then, again go up like a triple single. look at the arrows go from the middle out on the ears.
Step 14:
Take your hook and go through one ear and pull a rubber band through and again for the other ear
Step 15:
This is what your loom should look like
Step 16:
Now you can pull it off of the loom . You have your finished owl
69 Comments
Question 5 months ago
Hey! I love the tutorial, I’m just wondering, how do you add the loop for step 14? It’s not making sense to me
2 years ago on Step 11
Hi what is a cap band and how do you apply it?
Reply 1 year ago
I think it’s a ‘cat’ band, probably a spelling mistake. A ‘cat’ band is when you wind a band around multiple times, depends on how many times the instructions wanted you to do. For example, a 4x band means that you wind around four times
3 years ago
i love mine i made mine into a pencel hugger
go look on youtube the loom detective there is a puppy pencel hugger that i made and it looks adorable and just like on the vidoe
Question 3 years ago
How do i do a loop band?
Answer 3 years ago
hi u do it by going tru everything then u take the 2 bottom ones and go forward and put it on the next peg hope i could help
6 years ago
I gonna try one more time!
6 years ago
I messed up! Cool instructions. Maybe I'll get better luck last time
6 years ago
I cant beleive I did it! I feel happy. It's a little messed up, though.
6 years ago
Great tutorial!
7 years ago
do we have to have a loop
Reply 7 years ago
yep
7 years ago
YOU COULD MAKE A PENGUIN WITH THIS!!!!!!
Reply 7 years ago
:O so right!
7 years ago
How do u change your profile picture
7 years ago
I'm gonna try and then I will comment how it goes
8 years ago
Love the results!!
Reply 8 years ago on Introduction
gasp I LOVE POKEMON (btw may do a few pokemon instructables)
Reply 7 years ago
I do too
7 years ago
Looks so cute