Reclaimed Wood Panels

7,050

91

5

Introduction: Reclaimed Wood Panels

Here is a great and simple way to reuse old fence wood.
  • Cut off the bottoms that have rotted out.
  • Layout in straight rows or create a pattern such as herringbone on a piece of 1/2" plywood
  • Use screws or nails to attach.
  • Cut shape out using router for circles and complex curves or a saw for straight lines.
  • Hang on the wall
Don't over complicate this project, leaving it simple will bring more attention to the use of reclaimed wood and add the minimalist style.
Furniture Contest

Participated in the
Furniture Contest

Be the First to Share

    Recommendations

    • Digital Fabrication Student Design Challenge

      Digital Fabrication Student Design Challenge
    • Electronics Contest

      Electronics Contest
    • Frozen Treats Speed Challenge

      Frozen Treats Speed Challenge

    5 Comments

    0
    dwdefreitas
    dwdefreitas

    8 years ago

    Where are the actual instructions? Without those it feels more like a "suggestible."

    0
    M.O.T.H.
    M.O.T.H.

    Reply 9 years ago on Introduction

    I think that would be a great use of large wire spools! Would love to see a photo of it.

    0
    TyrleY
    TyrleY

    9 years ago on Introduction

    great design. this would be a cool giant clock in my living room.

    0
    M.O.T.H.
    M.O.T.H.

    Reply 9 years ago on Introduction

    The large panel is 6' and is about 150lbs. I used 2, 300lbs hooks just to be sure it wouldn't come off the wall. Between the reclaimed and 1/2" ply, there would be plenty of room to carve out an area for the clock components.