Introduction: Red Robo Charger

This was made from odds and ends acquired from my dad's collection. I used an old wire cage shop light and some misc. lamp parts found in my dads shop.

This project also uses 1/2" pipe fittings

1/2 lock nuts

1/2 close nipples

4 square electrical box

usb outlet

decora switch

2 gang decora cover plate

computer power cord to plug into a wall outlet

This is wired in such a way that the usb outlet is on all the time.

The lamp can be tuned on and off with he switch.

This lamp is intended to be on your nightstand so you can plug in your phone etc at night.