Reset Service Maintenance Message in Volvo V50, S40, C30, C70

94,700

4

3

Introduction: Reset Service Maintenance Message in Volvo V50, S40, C30, C70

About: Hi! If you like my tutorials, you can check out my youtube channel: https://www.youtube.com/user/mrfixpl

Reset Volvo service reminder indicator or maintenance messages after changing oil, filters and inspecting brakes and suspension.

This procedure will reset messages:

TIME FOR REGULAR SERVICE
ENTRETEIN REGULIER NESECC
SISTEMA MOTORE PROSS.TAGLIANDO
STANDARDWARTUNG DURCH FUHREN
TAGLIANDO SCADENZA
TIJD VOOR REG SERVICE
WYMAGANY PRZEGLAD OKRES.
ZEIT FUR REGELM. WARTUNG

This also works in any other modern Volvo car, like: C30, C70, S40, S60, S80, V40, V50, V60, V70, XC60, XC70, XC90.

Step 1: Reset Maintenance Message

  1. Press and hold trip reset button,
  2. turn on the ignition,
  3. wait for the yellow warning light to start blinking,
  4. release the button and wait for confirmations sound,
  5. turn off the ignition,
  6. turn the ignition back on to check if the service message is gone.

Be the First to Share

    Recommendations

    • Plastic Contest

      Plastic Contest
    • The 1000th Contest

      The 1000th Contest
    • Battery Powered Contest

      Battery Powered Contest

    3 Discussions

    0
    RobertI62
    RobertI62

    Question 7 months ago on Introduction

    I have an engine system service required message on my V50 d5.
    It's just had a service and an MOT but can't get rid of it. Have tried several reset tips but the message is still there.
    The garage have tried connecting their computer to the reader but it doesn't seem to want to connect to my car.......any ideas would be greatly appreciated.

    0
    mr-fix
    mr-fix

    Reply 7 months ago

    "engine system service required" is not the same as the regular maintenance reminder.
    Maintenance reminder you can just clear and it will turn off. After some time or distance traveled (365 days or 20kkm, whichever comes first) it will pop back on the dash.
    However the engine service required is an indication that there's a fault that needs to be fixed. You should use diagnostic interface to read the fault code, fix the fault, and then clear the message with the diagnostic interface.