Introduction: RetroMv

My Project for the second of this semester was working the retro arcade machines here are the steps


Step 1: Step 1: Burning RetroPi Micro-SD

1. Download the RetroPi file I have shown In the video... here is the link

2. Next extract the file on to the desktop

3. Next open the extracted folder, and run the win32diskimager-1.0.0-install.exe

4. After Install, select, the RetroPi image, and select the device you will be burning it too

Step 2: Step 2: Setting Up

Things needed

Raspberry pi 3,

any kind of controller you chose to use, (for example we used a gaming board as well as a Xbox controller )

a hdmi Display

and a build to hold everything

Step 1:

After you are done burning the retro pi image onto the micro sd card,

get your raspberry pi and plug in your micro-usb cable, with your hdmi cable as well

Be the First to Share


    • Clocks Speed Challenge

      Clocks Speed Challenge
    • Toys & Games Contest

      Toys & Games Contest
    • Big vs Small Challenge

      Big vs Small Challenge