Introduction: Reuse Old Bullet Shells As Valve Stem Covers
Use old 30. Cal bullets to make tire valve cover
Step 1: Gather Materials
Two 30. Cal shells
Pipe cutters
Drill
Sand paper
Plyers
Step 2: Sand Shells
Sand them with 400 grit paper to shine them up a bit
Step 3: Cut Shells
Cut the shell in half to get it the right size
Step 4: Remove Burr
Take a drill and drill the burr almost out leave enough to screw on
Step 5: Install
Just put on like regular and have fun
![Bike Contest](https://content.instructables.com/FTV/857Q/HERLMLEW/FTV857QHERLMLEW.jpg?auto=webp&frame=1&width=320)
Participated in the
Bike Contest
![Instructables Green Design Contest](https://content.instructables.com/F7Y/91K9/HFSHSF51/F7Y91K9HFSHSF51.jpg?auto=webp&frame=1&width=320)
Participated in the
Instructables Green Design Contest
![Epilog Challenge V](https://content.instructables.com/FGP/FD19/HFBKEI2U/FGPFD19HFBKEI2U.jpg?auto=webp&frame=1&width=320)
Participated in the
Epilog Challenge V