Reuse Plastic Bottles and Old Candles to Make New Candles
Intro: Reuse Plastic Bottles and Old Candles to Make New Candles
Materials needed
Old/used candles
Weaved cotton rope
Used plastic bottles
Tools needed
Drill
Drill bit (same diameter as the cotton rope)
Cooking pan
Duct-tape
exacto knife
nails
stove
STEP 1: Drill Holes
Drill holes in the middle of the bottom of the plastic bottles
STEP 2: Rope and Tape
Cut pieces of rope the size of the bottles plus 10 cm
Example bottle height = 15 cm therefore rope length = 25 cm
Now put the rope through the bottle
Use the duct tape to tape the rope (very tight) tothe bottom
STEP 3: Knot Around Nail
Tie a knot around a nail so the rope will stays in the middle of the bottle
STEP 4: Melt the Candles
Break pieces of the candles and put them in the cooking pot
Let the wax melt on a low fire
STEP 5: Pour the Wax
Pour the molten wax in the bottles
Let them cool overnight
STEP 6: Peel the Plastic of the Candles
Cut the rope just below the nail
Use the exacto knife to make a diagonal cut in the top of the bottle
Now you can just peel the rest of the candles
Cut the rope on the bottom of the candle
3 Comments
splazem 12 years ago
Kaptain Kool 12 years ago
nadera16 7 years ago
Hello,
I followed all the instructions. everything went good until I poured the wax into the bottle. the bottle melted. is there a way to preserve the bottle during pouring the wax so that it doesnot melt? I need to have a candle shaped like the bottle that I have.
Any help please
Thanks