Ribba LightBox: Keep Calm and Exterminate




Introduction: Ribba LightBox: Keep Calm and Exterminate

This is a quick Weekend Project. I wanted to test to engrave on glass, but I had the idea to paint it first black, to bring the picture more in scene.

I still own a few old Ikea Ribba frames, the one with the glass front, so it was great for this project.

Step 1: Preparing the Frame and the Glass

Take the ribba frame appart.

Clean the glassplate with acohol and use a spraycan with black color to paint it.

Let it dry.

Step 2: Designing the Picture

The “keep it calm and exterminate” was not my idea, I saw it on a T-shirt

I loved it, so I created my own

The Dalek has been drawn in QCad, the characters and and the composing had been done in Inkscape.



Step 3: ​It’s Laser Time

I first lasered markers on a peace of wood to align the glassplate.

To do the laser job I use an Epilog zing 16 30Watt.

Step 4: Lights

I use my self designed PCB’s, but perfboard should be perfect to.

Any other light source will work to.

The micro USB breakout board will be installed on the back to connect a 5V USB power supply

Step 5: Building All Together

Build the frame together and install red LEDs inside. On the backside a glued alufoil, to reflect the light.

The micro USB breakout board is fixed with hot glue or screws on the back of the frame.

Step 6: Showcase

Here is the final Lightbox

Be the First to Share


    • Make it Glow Contest

      Make it Glow Contest
    • Baking Contest

      Baking Contest
    • Cold Challenge

      Cold Challenge



    4 years ago

    Haha that's fun! Niceley done.