Robot Arm for Laser Cut

Introduction: Robot Arm for Laser Cut

Here, Now I'm going to show you how to make a 4 sservo robot arm. This robot arm uses linkage mechanism, controlling by arduino. This project started in May 2016 robot class. I've made the ai file of parts available for everyone to download for free. You'll need to adapt it to suit the file format of your particular laser cutter.

Step 1: Getting the Parts

To make this robot arm you need some parts:

-arduino

-4 servo motors

-elecrical wires

-lasercut parts

-bolts & nuts

Step 2: Prepare the Base

I'd like to make the base part first, well without a strong base parts, robot cannot be strong.

Print the bottom parts. Combine servo motors with wood.

We have to print a ring which makes robot can spin around.

Step 3: Construct the Front Hand Side

Print the body and robot arm sketch using laser cutter.

Combine servo motor with body parts.

Step 4: Construct the Behind Hand Side

It's almost same with front hand side

Print the body and combine the body and robot arm

Step 5: Combine Front and Behind Hand With Base

It's easy ~ Just follow the picture then you can make it!

Step 6: Gripper

It's little bit complicated parts , so follow the pictures .

Step 7: Box

We need box to fix it ~

we'll combine base parts with it

Step 8: Code

I add the code file

f - front hand

d- behind hand

g- gripper

b- base

1 means first loop and 2 means second loop.

Step 9: Complete !!!!

Wow~ You made it !!

Congratulation~

Wood Contest 2016

Participated in the
Wood Contest 2016

Be the First to Share

    Recommendations

    • Make it Glow Contest

      Make it Glow Contest
    • First Time Author Contest

      First Time Author Contest
    • PCB Challenge

      PCB Challenge

    7 Discussions

    2
    cole349
    cole349

    Question 1 year ago on Step 1

    witch servos did you use?

    2
    MarvinB20
    MarvinB20

    3 years ago

    What are the dimensions of your arm?

    0
    KrishnanunniC
    KrishnanunniC

    4 years ago

    will it work with micro servo????

    0
    christineun
    christineun

    Reply 4 years ago

    i think it's not working . . At first i start to make it with micro but torque is not enough if you make little robot then i think it's possible

    0
    HyosikB
    HyosikB

    4 years ago

    ^^ 감사~~ ^^

    0
    christineun
    christineun

    Reply 4 years ago

    네~~ 'ㅁ'

    0
    seamster
    seamster

    4 years ago

    Very nice! I like wooden robots - it's such a cool juxtaposition of elements. Good work :)