Rope From Bottle
Intro: Rope From Bottle
It's cheap and very easy!
STEP 1: Need!
1. Square aluminum tube without 1 wall
2. Penknife
3. Bolts and 2 nuts
STEP 2: Drill Hole!
Ignite blade as shown in the photo on the site drill hole.
STEP 3: Cut!
Ropes width depends on how much incised
STEP 4: Screw a Pin!
Insert knife and screw a pin as shown in the photo
STEP 5: Cut a Piece of Wood and Done!
Cut a piece of wood and insert as shown in the photo.
It's done! It's really easy!
4 Comments
Mindmapper1 8 years ago
mmm this does work but the instructions are not a high quality which is a shame. The video does work.
kbc2 9 years ago
wilgubeast 9 years ago
Watch the video and it'll make more sense.
Garadin 9 years ago
the video does not work