RotoGPU

Necklace made of:
- nVidia GPU
- rotor

Step 1: Shaping and Drawing Guiding Lines

Shaping the GPU leaving a native board hole for the neck chain.
drawing the guiding lines for cutting the interior.

Step 2: Interior Cutting

Drilled the corners by a diamond bit and cut the interior from hole to hole.

Step 3: Preparing for Rotor Mounting

Drilled holes and milled the channel for the rotor ax by diamond bit, under water for cooling the bit.

Step 4: Mounting the Rotor

Keeping the rotor ax in place by two copper wires.
The rotor can be rotated.

Step 5: Fully Assembled

Put the neck chain and a coating varnish on the back side of the GPU.