Introduction: S-GDSP: K'nex Mag Fed Disk Shooter Pistol INSTRUCTIONS
Here it is, and hopefully a comeback from my first *ahem* crappy *ahem* pistol (which was removed- it was an embarrassment.). It shoots small wheels with very good power, and could be modified to take medium wheels. The mag holds 8 wheels, however if you do not want to cut your pieces, it will hold only 4.
Pros & Cons time!
PROS:
There are no other guns on Instructables like it.
good power
brilliant range
Good as a sidearm
CONS
ugly looking
sometimes inaccurate (shoots up over target)
Here's a video to show you guys how this bad boy performs!
So, what do you guys think? Comment below!
Pros & Cons time!
PROS:
There are no other guns on Instructables like it.
good power
brilliant range
Good as a sidearm
CONS
ugly looking
sometimes inaccurate (shoots up over target)
Here's a video to show you guys how this bad boy performs!
So, what do you guys think? Comment below!
Step 1: Magazine
'YOU TELL US TO MAKE THE MAG FIRST?!?! ARE YOU INSANE!?!?' is what you are probably thinking. And i reply 'Yes, yes i am.'
Pic 1: make 3
pic 2: make 2
pic 3: put it together with blue rods
pic 4: another view
pic 5: add two cut blue rods, one yellow rod and a a snowflake connector like this
pic 6: another view
pic 7: make this.
pic 8: make this.
NEXT STEP!
Pic 1: make 3
pic 2: make 2
pic 3: put it together with blue rods
pic 4: another view
pic 5: add two cut blue rods, one yellow rod and a a snowflake connector like this
pic 6: another view
pic 7: make this.
pic 8: make this.
NEXT STEP!
Step 2: Handle
'WHAT!?!?! THE HANDLE TOO!' ' Yes, the handle too.'
Pic 1: make 1
pic 2: make 1
pic 3: make 1
pic 4: another view
pic 5: add here
pic 6: add first part.
Pic 1: make 1
pic 2: make 1
pic 3: make 1
pic 4: another view
pic 5: add here
pic 6: add first part.
Step 3: Body & Assembly
'Ok, why are we doing the body last?' I hear you cry. 'BECAUSE I'M MENTAL!!!!'
pic 1: make 1
pic 2: make 1
pic 3: make 7 of each
pic 4: add the parts from the previous picture
pic 5: add the first part
pic 6: add these pieces on each side
pic 7: attach the handle
pic 8: make sure you add these y-connectors
pic 9: attach the mag
pic 10: put the mag pin in
pic 11: add the mag push
NEXT STEP!!!
pic 1: make 1
pic 2: make 1
pic 3: make 7 of each
pic 4: add the parts from the previous picture
pic 5: add the first part
pic 6: add these pieces on each side
pic 7: attach the handle
pic 8: make sure you add these y-connectors
pic 9: attach the mag
pic 10: put the mag pin in
pic 11: add the mag push
NEXT STEP!!!
Step 4: Rubber Bands & Firing Pin
now, this actually makes sense!
pic 1: make the firing pin
pic 2: put it in here
pic 3: make 3 of these
pic 4: add here
pic 5: put a rubber band here...
pic 6: ... and here.
NEXT STEP!!!
pic 1: make the firing pin
pic 2: put it in here
pic 3: make 3 of these
pic 4: add here
pic 5: put a rubber band here...
pic 6: ... and here.
NEXT STEP!!!
Step 5: Loading & Shooting
yaaaay! you have finished the build! now, learn how to load.
pic 1: remove mag lock pin
pic 2: put wheels on
pic 3: pivot mag back up, replace the mag lock pin, and hook the band from the mag push on top of the barrel
pul back firing pin, aim and shoot. repeat.
soo, what do you guys think? Comment below!, Also, PM me a picture of yours for it to be featured on the next page!
Spazgadget (follow me!)
COMING SOON*:
Rifle version w/ removable mag!
*(soon = whenever i finish my IAC cannon :3)
pic 1: remove mag lock pin
pic 2: put wheels on
pic 3: pivot mag back up, replace the mag lock pin, and hook the band from the mag push on top of the barrel
pul back firing pin, aim and shoot. repeat.
soo, what do you guys think? Comment below!, Also, PM me a picture of yours for it to be featured on the next page!
Spazgadget (follow me!)
COMING SOON*:
Rifle version w/ removable mag!
*(soon = whenever i finish my IAC cannon :3)
Step 6: YOUR Versions!
Pictures of YOUR versions will be posted here! PM them to me!