SUPER AWESOME KNEX WII ZAPPER GUN LIGHT GUN WITH ONLY 1 RUBBERBAND!!!

by DYLEGO

5.9K269

Intro: SUPER AWESOME KNEX WII ZAPPER GUN LIGHT GUN WITH ONLY 1 RUBBERBAND!!!

IM GONNA SHOW YOU HOW TO BUILD A KNEX WII ZAPPER!!! VERYSIMPLE, JUST FOLLOW THE PICTURES!!!

MATERIALS:

1 WII REMOTE
YELLOW KNEX CONNECTOR- 10
GREEN KNEX CONNECTOR- 14
BLUE/WHITE SNOWFLAKE- 4
ORANGE CONNECTOR- 6
GREY CONNECTOR, 1 SPOT- 14
GREY CONNECTOR, 2 SPOT- 2
RED CONNTOR- 2
BLUE ROD- 2
RED ROD- 4
WHITE ROD- 12
GREEN ROD- 14
YELLOW ROD- 3
GREY SPACER- 14

ENJOY!!!

STEP 1: BUILDING SIDES

Follow pictures...
1 build these
2 build these
3 build these
4 connect from 3 only connect 2 on far left
5 different view
6 attach... use other side if ur left handed...
7 another view
8 another view
9 another view

STEP 2: FIRING MECHANISM

FOLLOW PICTRES

1 build
2 anotger view
3 attach red
4 another view
5 attach to body
6 another view
7 add grey/another view

STEP 3: Finishing

follow pics
1 attach handle
2 yellow piece in left is mistake!!! see 3
3 put orange white thing where yellow was and move yellow down
4 attach yellow white thing on back
5-8 hard to see but attach rubberband from yellow thing that presses B button to orange, white thing

STEP 4: DONE

All picturwes are final views...

2 sided greys on bottom are trigger


Post mods to comments and instructables!!!

Bye...

70 Comments

Jahoovi 15 years ago

yours doesnt hav a dencent handle and the wii remote would fall out easily

alfpwns 15 years ago

FIGHT!FIGHT!FIGHT!FIGHT!FIGHT!

DYLEGO 15 years ago

the remote doesnt fall out if u build it right! either u built it wrong or u think u can tell if something works or not just by looking at a picture!

Jahoovi 15 years ago

no i meant it could move around like _ then \

popomaster 15 years ago

jahoovi, urs suck mores than his period, my pwns both of your though YAYAH. and if you want proof, go to my forum

DYLEGO 15 years ago

why is the nunchuk stored like that? u cant pres buttons on it and if u shake it u shake the remote and the nunchuk!

popomaster 15 years ago

no, its on a pump, so you dont spaz it around, you cok the nunchuck back and then you cok it forwards. the force of it hiting the end of the rail at any speed would make you reload. trust me, i have tested it on several games. medal of honor 2, resident evil umbrella chronicles, and ghost squad. its best for resident evil though. and the way it is, the you could easily grasp the nunchuk. you put your thumb on the c stick, you palm goes around the case for the nunchuck, and your pointer finger is on the z or c button. its easier to hold than you think just trust me. also, when you pump the nunchuck, it doesnt move the cursor because your not moving the entire gun, just the pump.

DYLEGO 15 years ago

wait, so reloading is done by shaking the nunchuk?

popomaster 15 years ago

well, there are wii zappers controler settings in the options menu for certain games, and to reload, you just pump the nunchuck pump back

DYLEGO 15 years ago

oh i see now. yeah i wanted to build a 1 handed gun for the wii remote only. i dont have any of those games so i wouldnt build something like that

RayGean 12 years ago

Thanks for these instructions :) The green handle hurts a bit in your hand because it sticks out a bit, and with the wiimote inside, it's kinda heavy. so I have to grab it with both hands because I can't put my other hand anywhere. but besides of that, it's a nice small gun, and it works fine. If you use something soft to cover the handle, it'll be fine. Good Job.

Sun Gear 14 years ago

nice. i modded this gun into a shotgun. its very nice.

willrandship 14 years ago

In my experience you need to shove the Wiimote farther in and rotate the yellow piece on the back inward. This allows for better b button contact and locks the remote in. It also frees up the nunchuck slot!
More Comments