Samsung Omnia 7 or Galaxy S JIG

By in CircuitsMobile

12,946

9

3

Introduction: Samsung Omnia 7 or Galaxy S JIG

How to put phone in download mode... Very simple... You need 301K 1% resistor on pins 4 and 5:

USB 1.x/2.0 Micro USB Pinout:
Pin Name Color Description:

1 VCC Red +5 V
2 D− White Data −
3 D+ Green Data +
4 ID none permits distinction of
Micro-A- and Micro-B-Plug

Type A: connected to Ground

Type B: not connected

5 GND Black Signal Ground


The back of the connector looks like this:

- - -
 - - 
Pins are:

5 3 1
4 2

Step 1:

The back of the connector looks like this:

- - -
 - -
Pins are:

5 3 1
4 2 

Be the First to Share

    Recommendations

    Building a GPS/GNSS Receiver Using MosaicHAT and Arduino
    Building a GPS/GNSS Receiver Using MosaicHAT and Arduino by jamalhazem98 in Arduino
    15 2.1K
    Paper Circuit Reaction Game
    Paper Circuit Reaction Game by BrownDogGadgets in Gadgets
    11 1.5K
    AutoStrummer
    AutoStrummer by JacobStambaugh in Gadgets
    70 10K
    2.1 Bluetooth Sound System - Fully Printable
    2.1 Bluetooth Sound System - Fully Printable by EH_Design in Audio
    2 707 43K

    • Toys & Games Contest

      Toys & Games Contest

    • Big vs Small Challenge

      Big vs Small Challenge

    • Fix It Challenge

      Fix It Challenge

    3 Comments

    0
    pmn9393
    pmn9393

    9 years ago on Introduction

    a lot of samsung galaxy s phones dont need anyhting like this. for my epic all i have to do is hold the "1" key before and while turning it on and i get into download mode and my fascinate was the volume down button

    0
    nerdtaco
    nerdtaco

    9 years ago on Introduction

    Can you add more pics? Does this work with any SGS phone, or only i9000?