Introduction: Scotch Light Aka Single Malt LED

About: Self learning person dreaming of engineering

This is for adult science fun,...because nothing says nerd like a LED panel powered by your favorite drink


Icy Single Malt Scotch

LED panel (I took from a outdoor light)

Voltage booster with wires

Peltier Tile

Solder the LED to the voltage booster and the booster to the Peltier tile, the hot side of the tile down and place your favorite cold beverage on the cold side! Boom, light!

the voltage prior to the booster is about 100mv, with the booster close to .5v,....enough to power any simple led. straw led work also,...shouldn't pay more than 1 dollar for light, 4 dollars for the tile (or remove from old mini fridge), booster may cost 20 dollars.