Introduction: Scratch Built Delta Wing RC Plane
After being tired of using other peoples designs and PDFs. i decided to make my own! i came up with a base design and made up the body while creating the plane. i knew i wanted a stream lined body to reduce drag on the plane so i came up with the long slender fuselage and a sleek compartment for the components of the plane to sit in. Using a computer i came up with a basic out line for the plane. as you can see my base idea came alive in probably my favorite plane yet. the blue cards are note cards covering up logos and return address's(if i lose it somehow). i would like to buy a stunt camera to attach to the bottom to be able to get an Arial view to do some spying! (just kidding i wouldn't use it for creeping on people but it would be cool to have)
The plane measures out at a 31" wing span and 38' long
A step by step will be out but unsure of the date. Also the step by step will be of the plane i am currently building and planing which is more advanced and 3x bigger then the plane below!! there will also be a video of the plane below flying along with a video of the plane flying!!
Hope you enjoy!!

Participated in the
Make It Real Challenge

Participated in the
Remote Control Challenge
14 Comments
7 years ago on Introduction
nice one tho a bit rough
9 years ago on Introduction
They made a copy of the Predator UAV a few years back. It had a gimbal mount with a camera in it. Spy planes have been done. Instead,put racks in it and use empty CO2 cyllinders as dummy bombs and make it a bomber!
9 years ago
I love it :)
10 years ago on Introduction
Dude cant wait.
10 years ago on Introduction
how much does just the electrical stuff cost???
Reply 10 years ago on Introduction
Depending on where you order and what parts you already have, i would probly say 70$-80$ without the transmitter and reciever.
11 years ago on Introduction
Very cool design, I went on and built a rc plane like it, a very inspiring design
Reply 11 years ago on Introduction
Thanks good luck with yours!!
11 years ago on Introduction
That looks really awesome, i just started out with these and couldent ever get mine off the ground, finally found a guide at http://rcairplanes.prodvue.com/ that got me off the ground lol. Would love to build one of these things!
Reply 11 years ago on Introduction
I found planes for the body of another plane i built at http://rcfoamfighters.com/blog/ If u go to their airplane page there are some free PDFs that you can download and cut out to make templates for the body of the plane. that's how i got started along with thousands of youtube tutorials. Good Luck!! there very fun to make and fly! ( the plane in the instrucatable is not on the website but i will be creating a step by step for this one)
11 years ago on Introduction
I'd like to see the step by step tutorial.
Reply 11 years ago on Introduction
A step by step will probably be made in a month so hopefully it will help anyone in getting into the RC plane world!
11 years ago on Introduction
Nice design.
Regarding "With a big enough response..." I said "a good teacher teaches his class even if only one student is present".
Reply 11 years ago on Introduction
Thank you and i said that because the plane does cost a decent amount of money to build, but speaking i am still a amateur at flying RC planes ill probably crash it then rebuild it. its then during that rebuild process i will make the step by step. Overall i will be posting a step by step. Also thank you for the advice!