Introduction: Self-powered Popsicle Stick Boat

Matrials needed:

hot glue

Popsicle sticks

2 dowels


2 rubber bands

4 spoons

Step 1: The Base

Make a U out of 3 Popsicle sicks and make a sheet of Popsicle sticks on top of it.

Step 2: Add a V to the Open Part of the Board

Attach the V by hot gluing a Popsicle stick on the intersection.

Step 3: Fill in the Rest

Fill in the gap according to the picture above.

Step 4: Fill in the Gaps

Using hot glue, fill in the gaps.

Step 5: Create 4 More Layers on the Edge

Follow the pictures above.

Step 6: Make Rubber Band Chain

Take 2 rubber bands and follow steps above

Step 7: Attach Rubber Band

Attach the rubber band chain to an 8-in. dowel using steps above.

Step 8: Attach Dowel

Hot glue rubber band end to the end. Make struts across the top.

Step 9: Fill It the Top

Add the Popsicle sticks according to the pictures.

Step 10: Make a Triangle

Make a multiple layer triangle.

Step 11: Put String On

Put string on the tip of the triangle.

Step 12: Put Other End of String on Dowel

Take another dowel and attach the other end of the string to a dowel.

Step 13: Spoon Heads

Cut off 4 spoon heads

Step 14: Put the Stuff On

Put the triangle on the top of the back. Attach the spoons to the dowel.