Introduction: Sheldon Cooper T-Shirt Folding Hack
Materials:
One beer box or similar in size cardboard box
Knife
Duck tape
One beer box or similar in size cardboard box
Knife
Duck tape
Step 1:
Deconstruct box. Take the top and bottom tabs of the box apart. Lay flat.
Step 2:
Cut along the top end.
Step 3:
Cut the bottom end of the box along seam.
Step 4:
Discard one side.
Step 5:
IMPORTANT:
Leave gap between flaps. About 1/4inch. I just used the natural gap of the box.
Duck tape the two flaps, with gap left between.
Leave gap between flaps. About 1/4inch. I just used the natural gap of the box.
Duck tape the two flaps, with gap left between.
Step 6:
Duck tape the other side of the box and join the tape together between the gap.
Step 7:
Press the tape together. Should look like this.
Step 8:
One side done.
Step 9:
Repeat steps 5-7 one the other side.
Box construction finished.
GO GRAB A SHIRT!
Box construction finished.
GO GRAB A SHIRT!
Step 10:
Face shirt flat face down.
Step 11:
Fold one side over quickly.
Step 12:
More flap back.
Step 13:
Fold over the other side quickly.
Step 14:
Place left hand or the side your sleeves are on and fold it over quickly.
Step 15:
Like so.
Step 16:
And you have a perfectly folded shirt even your mom would be proud of.
It also works with sweatshirts.
Video:
https://www.youtube.com/watch?v=jjvtQ33_7Sw
It also works with sweatshirts.
Video:
https://www.youtube.com/watch?v=jjvtQ33_7Sw