Shoebox Gutair!

by ARock4408

95162

Intro: Shoebox Gutair!

STEP 1: Materials

You will need: At least 2 rubber bands At least 2 screws A Shoebox Scissors Ductape A 12 by 3 piece of cardboard

STEP 2: Ductape

Tape the top to the bottom of the shoebox

STEP 3:

STEP 4: Cut

Start Cutting a circle in the middle of the box

STEP 5:

STEP 6: Cardboard

Take the excess piece of cardboard and tape it on so it's about 7 inches off the side

STEP 7:

STEP 8: Holes

Poke at least two holes in the card board

STEP 9: Screws

Take at least 2 screws

STEP 10:

STEP 11: Rubber Bands

Take at least 2 rubber bands and tie them to the screws. The screws will tune your gutair.

STEP 12:

STEP 13: Tape

Tape the rubber bands right after the circle hike to the shoe box

STEP 14: Secure

Put a piece of tape between the cardboard and the shoe box to make sure it's secure. There! You are finished. I hope you enjoyed and I would really appreciate if you like this instructable! Thanks and enjoy!

2 Comments

GBFace 10 years ago

Looks like a tank