Intro: ShopBot

I learn it at TechShop Menlo Park!

STEP 1: Sunday Morning in La Honda, CA Where I Live

STEP 2: Taking Care of My Animal With My Wife

https://picasaweb.google.com/105061902705790478264/InstantUpload#5736860640181290370

STEP 3: Came to TECHSHOP

STEP 4: Get My Task for Today: Do Partes at ShopBot (alone)

Getting message from Justin left at front desk with Chris

STEP 5: Going Inside and Meet Ben (last Time I Meet Ben I Was Member, Now I Am Staff :)

STEP 6: Put My Tupperware in the Refrigerator

STEP 7: Drinking a Coffee in the Clay Way

STEP 8: Okay, That Is the Machine I Will Work Today

Brief description of potentialities

STEP 9: Turn on the Computer (computer Control the ShopBot)

STEP 10: Ops, Running Back to Front Desk and Get the ShopBot Kit

Chris always sympathetic :)

nice work with happy people :)

STEP 11: Message Understood and Ready to Start

STEP 12: Mounting the Bit in the Router

STEP 13: THAT IS THE EXACT POSITION FOR THE BIT

This page value this full instructable

STEP 14: First Put the Bic in the Router

STEP 15: Than Put the Bit in the Bic

STEP 16: Gorilla Tie

STEP 17: Put Toolbox Aside

STEP 18: Copy the Working Files From the Memory Stick to the Computer Desktop

At Techshop every time you turn of a computer ALL saved members files are deleted

STEP 19: Open ShopBot

STEP 20: Ops,

STEP 21: Turn on the Machine

STEP 22: Now Is Okay Retry Conection Between Computer and Machine

STEP 23: Zero X and Y Axes Proximity Switches

STEP 24: Zero Z Axis With Zero Plate

STEP 25: Take Safe Plate From Support

STEP 26: Put Under the Bit

STEP 27: And Press OKAY

STEP 28: Send Router Back "Home" Position

STEP 29: Put the Board Over the Machine

STEP 30: Zero Out the Board in the Sacrify Board

STEP 31: Screw It

STEP 32: Turn on "Tufonio"

STEP 33: Turn on "Suckineo"

STEP 34: Load the File

STEP 35: Start Cut

STEP 36: Turn on the Router

STEP 37: Hit OKAY

STEP 38: And the Job Will Be Done Soon

STEP 39: After Job Done, Move the Plate Out

STEP 40: Take the Broom at Wall

STEP 41: Sweep Very Well the Plate Support

STEP 42: Blow

STEP 43: Load a New Plate and Repeat the Process With All Draws

STEP 44: While the Machine Cut One Piece, Take the Cut Parts From the Other

STEP 45: Put Scrap Outside

STEP 46: And After Everithing Done, Clean Up and Storage the Parts Close the Router to Bur, DONE :)